Dimmable LED tube

Product Information

1. Model: BL-Tube-3012-1200mm-20W
2. Frequency: 50-60 Hz
3. Input Volltage: 110/240VAC
4. Power Consumption: 20W
5. Working Temp: -20°C – 45°C
6. LED QTY: 182pcs
7. LED Brand: Ultra-Bright Epistar
8. LED Type: SMD3012
9. Lumens: 1600LM
10. Color: 3000K,4000K,5000K,6000K
11. CRI: 70
12. Beam Angle:
13. Lamp Base: Provided fitting
14. Material: Aluminum + PC
15. Dimension:
16. Net Weight:
17. Approval: CE&Rohs
18. Life Span: 30,000 H
19. Warranty: 2 years
20. OEM/ODM Services: Available
21. Samples: Available on request
22. Replacement: Traditional fluorecent tubes 40W
23. Dimmer: Remote control dimmer

LED panel lights installed in various forms, easy to install:
  
1, can be mounted on ceilings, walls and installation of the surface;
   
2, can be hung from the ceiling or installed below the body. When mounted on a white ceiling, the ceiling was the same color, very beautiful, clean, coordination;
    
LED panel lamp using broadband voltage design (AC85-240V/50-60Hz), can be used in the world; high-power LED with isolated power supplies, constant current or constant voltage drives, power supplies, high efficiency, no pollution to the power, performance, stability, security reliable;
   
LED panel lamp is similar to LCD TV backlight technology, a new type of surface light source, light and soft, pleasing in appearance, has been widely favored by European and American businessmen, a large number of foreign investors in Buy good quality, good service, good prices and supply panel lamps business;
    
LED panel lights seem just a simple lighting models, but because of its high market position determines the customer’s quality requirements for this product is extremely harsh, with the product itself related to materials, optical, structural, metal, electronic and other areas, a company’s development team is not complete and adequate experience in the development and subsequent supply chain management capabilities, can not really developed, combined with knowledge of market requirements is not clear, so a lot of development costs go to vote in return for a client does not endorse products.

   
welcome to our website to buy!

LED Tubes Need to Lower Heat-emitting to Cut Down Price cost

LED tube price high is the universalization obstacles, price factor decided the cost of LED tubes superiority and the price could let mass acceptance, is to influence LED lamps and lanterns to replace the traditional lamps and lanterns is one of the important factor.

The actual LED chip cost only 15%, other costs to packaging, heat to the main structure, cost, power supply. From the composition of the cost to reduce the cost of lamps and lanterns is in manufacturing process, simple request LED chips is not a too big reduce the role. Lamps and lanterns manufacturing need whole reasonable price, reasonable planning, comprehensive simple request a certain part of the cheap effect is not big, but we design the lamps and lanterns of the overall structure to the economy, is the most important optimization.
With technology, LED chips using larger size increase wafer production process, the cost will be constantly in recent years, the rate of 20% per year in lower, LED chip prices factor, will also included in the ascension of the efficiency in the lower prices, the same price to buy a better product. LED chips 15% proportion, it was reasonable, will continue in this level.

LED the price of take a package cost proportion, about 50%, we must choose the more appropriate LED package structure. Cree, Lumileds, OSRAM existing encapsulation are not accord with lamps and lanterns to design, design cost will not high. The bold innovation design is the product design way out, mostly we use copying or big company seal structure thinking and innovation too little, to their own creative lack of confidence. COB is the future lamps and lanterns design mainstream way, according to the lamps and lanterns optical requirements COB packaging, as well as reduce secondary optical design cost. Packaging costs in the total cost of the lamps and lanterns of 20 to 30% only is more reasonable.

The actual cooling the design is simple, held two direction:

1, LED chip and the cooling device path more short more good, the short your heat, the better the design;

2, thermal resistance, is to have enough heat to path also want to have enough ‘road’. This part of the heat in structure, used for major cost cooling costs is not much.

Heat dissipation cost to maintain at 20%, 20% think very reasonable cost, the biggest problem is how to have more innovation, design more reasonable. Structure design in lamps and lanterns to be about of the power supply is LED lamps and lanterns is the weakest link, lagging development LED lamps and lanterns, to improve quality. Now accounts for 20% of the cost of lamps and lanterns design or so, some high. As technology development in about 5-10% power the most reasonable.

LED Spot Light Replacement Halogen Analysis
Summary: although halogen to shoot the disadvantages of limited its potential applications, but is still widely used in stores and boutiques decorative lighting. With the shoot the light cup, day LED spotlight progress of technology, already can completely replace halogen lamp, give full play to the advantages of LED lighting, has large area alternative halogen to shoot the light. This paper, from the flux energy saving effect, and lamps and lanterns maintenance costs, all aspects of two kinds of lamps and lanterns are the direct comparison, in order to let more DuoRen understand LED spot light.

Halogen lamp: belong to incandescent lamp light source, that is woven in white in the halogen gases filling, making the light source the performance improved, photosynthetic efficiency from 8 LM/W increase to 12-15 LM/W, greatly reduce the volume of light source, can suit more lamps and lanterns use; Life from 1000 hours to 3000 hours increased to 2000; But its always belong to thermal radiation to shine, and smooth effect has been to not up, now in the world scope are limiting the use of; High heat, light failure is serious; The light with ultraviolet radiation, long exposure to textiles, jewelry and jade surface discoloration. Fade
LED spot light: semiconductor emitting diode technology; Currently lighting applications efficacy 100 ~ 120 LM/W; The service life of 30000 ~ 50000 hours; High photosynthetic efficiency high show color sex; Cold light, no radiation and ultraviolet radiation;
A comparison, flux
Halogen lamp cup usually have three specification: 20 W, 35 W, 50 W, we can use 3 by 1 W, 5 × 1 W, seven by 1 W lanterns day to replace.

Halogen light cup (LM) power flux LED lamp power flux (LM) note

20 W 300 3 315 halogen lamp efficiency of value 15 LM/W; LED lamp bead 1 W power efficiency of the conservative value 105 LM/W.

35 W 525 5 525

50 W, 750 and 735
Conclusion: 3 by 1 W, 5 × 1 W, seven by 1 W LED spot light in the flux can completely replace the traditional 20 W, 35 W, 50 W halogen to shoot the light

Two, the energy conservation effect and the maintenance cost comparison. Lamps and lanterns
Our stores and shops to decorate a higher frequency places (3 years a decorate frequency, 10 to 12 hours every day illuminate) as an example to compare. Household decorate, office and other places of low frequency, the more obvious effect LED lights.

Halogen light cup power consumption (c) needs a number of lamps and LED spot light power consumption (c) needs a number of lamps and lanterns

20 W 219.00 5 3 W 32.85 0.5

35 W 383.25 5 5 W 54.75 0.5

50 W 547.50 5 7 W 76.65 0.5
Note: this power consumption for three years, the value of the cycle decorate (3 years by 365 days/x 10 hours/day in); Halogen lamp normal life for 2000 to 3000 hours, LED lamp normal life for 30000 to 50000 hours.

Conclusion: LED spot light in the shopping mall, stores and other places alternative halogen shoot the light is energy efficient, zero maintenance cost, no heat, no cold light ultraviolet radiation, no damage to the product etc, and replace halogen shoot the light is imperative.

LED Factory Excessive Investment Causes Bankruptcy Storm

Mainland led industry in recent years, however, the high speed development into flocking to join led the market, industry and investment funds, the huge hot trend in second half 2011 facing market stall, the recent crisis led industry are pointed out, the mainland led industry is about to get to the knockout, about 1 into enterprise will face to quit, the mainland XinGuang electricity exit led cointegration epitaxial industry, the mainland shenzhen led FengZhuangChang junduoli also appear without warning collapse, Taiwan factory privately said, the mainland market mines, have a bit inadvertent will face in the debt collection, Taiwan is the sackings factory.
According to the points out, junduoli won China shenzhen optoelectronic industry 10 strong enterprises, and in sichuan province, all have to put those investment to LED lighting business opportunities, but company officials default on more than 200 employees and a monthly wages, and owe the bank debt, suppliers, 11 eve in tens of millions of suddenly gone missing, the LED industry comes out, and part of a factory may not receive end the money, will recognize losses, but including LED grain factory crystal electricity, ladies first round companies are pointed out, and junduoli and no close contacts with early, not affected by it.
The industry says, in the official support LED lighting, mainland LED industry in recent years, with the excess investment makers, now about 90 have LED grain factory, but also has about 9 into losing money, as for the downstream packaging application factory numerous, size is differ, uneven, and the market demand by 2011, according to the industry downturn affect mainland statistics, foshan city in guangdong province in the 50 stores in LED lighting makers, 2011 order reduced on average 10 to 30%, but the enterprise production cost? Yu) W rose 30%, 7 into enterprise profit declined.
Because since 2011, mainland for 12 times the central bank to raise deposit reserve rate, 21.5% of the level is not only a record, in a bank monetary pressure, more smoke house industry appear fund revolving problem, expected in the = junduoli incident, fear will barrage appear out of events. Collapse
But for the mainland authorities LED lighting policy direction invariable, including mainland China 1025 planning, LED lighting is expected to will account for 20% of the whole lighting proportion, will drive the mainland LED lighting domestic market, in addition, the rapid rise is expected by the end of the mainland authorities also announced the subsidy policy LED lighting, including the Treasury Department in conjunction with the national development and reform commission, is expected to LED lighting products to subsidize, will start to priority indoor illumination and commercial lighting products subsidies, such as canister light, and shooting, shoot the light, and gradually expand the scope of subsidies.
LED operator said, LED lighting products cost per lumen ($/ lm) annual decline in average about 20%, and in recent years has accelerated the trend of the cost down. According to the energy department is forecasting, white LED encapsulation lumens cost will be from 2009 in 25 $/ KLM, descend to 2015 years of 2 $/ KLM, average annual costs fell by more than 30%, and in 2010 ~ 2012 years at an average annual rate of nearly 40%, therefore fell by 2011 to 2012 will be LED and traditional lighting down the fastest time of price, it will also mean that LED industry will enter the integration of merger, Taiwan industry I’m afraid this trend will suffer.